How to Install a Ghost Immobiliser
A ghost immobiliser can be an effective deterrent to thieves of cars. By pairing this device with other security systems and staying alert, you can build a robust defense against modern, tech-savvy thieves.
A ghost immobiliser will protect your vehicle from hotwiring and relay car thefts by requiring you enter a pin code in order to start your vehicle. It works by using buttons that are already present in your centre console or steering wheel, so it's not visible to thieves.
Identifying the Wires
With increasing instances of vehicles being stolen without the owner's key, it's vital to safeguard your vehicle. While thieves may be able to clone your key fob, or even steal your car by hacking its system and stealing the vehicle, a ghost immobiliser provides an extra layer of security by blocking all signals from the key fob, making it impossible to start your vehicle without entering a PIN.
While you could install a ghost immobiliser yourself, it is recommended to hire a professional technician complete the job for you. A professional technician will know where to install the unit and how to connect it to the wiring of your vehicle. The process of installation is not easy and it is vital that the connections are done correctly to avoid issues or malfunctions.
Wearing safety gear and working in a place that is well-lit will ensure you get the best results. Also, you should read the user manual and familiarise yourself with the wiring system. This will aid you in identifying the wires needed for the installation and make sure that you have the correct tools and parts to do the job properly.
Once the wiring has been connected, you are able to reconnect your battery and see if the system is functioning properly. To avoid electrical problems be sure that the battery's terminals have been secured. Also, mark the CAN H and CAN L wires with labels or tape to keep track of them throughout the installation process.
The Ghost Immobiliser allows you to put your vehicle in Transport Mode if you want someone else to drive it for a short period of time, for example, for valet parking, or if the vehicle requires to be maintained. You can enter the code using the service button on the steering column, the centre console or door panels. Then, the Ghost Immobiliser enters the mode of changing the PIN code.
Some thieves attempt to bypass ghost immobilisers using jamming or spoofing devices that block or send fake messages to the system. This can be prevented by investing in anti-jamming technologies and regularly monitoring your Ghost immobiliser to detect signs that it has been altered with.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security tool designed to stop car theft. It utilizes cutting-edge technology to monitor and disable the engine when the correct PIN code is entered, thereby stopping the vehicle from being stolen by thieves. The system is extremely efficient and stealthy, as it does not have visible indicators to stop criminals. However, there might come an occasion when you have to remove the device, whether for maintenance or upgrades, or to sell your car.
This procedure requires special tools and knowledge because you'll be working with wires and bypassing certain factory parts. Moreover, it is essential to follow the step-by-step instructions provided by the manufacturer of the ghost immobiliser. You should also seek advice from an expert mechanic or auto electrician, especially if you do not have any prior experience working on vehicles.
After identifying the wires and disconnecting them, it is important to examine the condition of your battery. Make sure it is clean and free of corrosion, and that the connections are secure. Consider replacing the battery if necessary to ensure it is sturdy enough to meet the electrical demands of a security aftermarket.
After you have disconnected the wiring from the battery, you are now able to begin to take out the ghost immobiliser. Use strippers or wire cutters to safely disconnect the wires, making sure not to damage the wires or their terminals. Label each wire to make it easier to reconnect them in the future. If the wires are soldered together using a heat-resistant tool to break the connection. It is also essential to shield the wires with insulation tape or shrink tubing to prevent them from short circuiting.
Reconnect the wires using the 12V constant power source. Use the fuse tap to safeguard the connections by using fuse. Finally, connect the grounding wire to a grounded point on the vehicle's chassis.
Once you've reconnected the wires, turn off your vehicle and enter the PIN. Then, start the engine. If it fails to start the ghost immobiliser has been successfully removed.
Making the Connections
A ghost immobiliser is an affordable way to improve the security and safety of your vehicle. It connects to your vehicle's CAN bus system, capturing signals and stopping the engine from starting until the correct PIN code is entered. It is nearly impossible to disable. It's an excellent choice for drivers who want extra peace of mind and security. It can lower your insurance premiums when used in conjunction with an Thatcham Approved Tracking System.
Obtaining and reviewing the wiring diagram for your vehicle model will be crucial in the process of installing. The diagram can serve as a roadmap for locating the necessary wires to make precise connections. Making use of the correct wiring connectors or soldering methods will ensure that the connection is long-lasting and secure.
The wires that connect the Ghost immobiliser to the CAN bus system need to be properly identified and connected. It is recommended to use small pieces of tape or labels to mark the CAN H and CAN L wires, since this will help to prevent confusion during the installation process. The location of these wires will differ for every vehicle, which is why it is essential to refer to the wiring diagram for your vehicle as well as online resources to identify them.
When the correct wires are connected after which the power to the Ghost immobiliser will be restored. It is recommended to test the immobiliser by starting the engine but not entering the PIN code. This will verify that the immobiliser is properly installed and is functioning as it should. It is important to test your immobiliser regularly. This will help you identify any problems or issues early.
Another benefit of the ghost immobiliser is that it can be set up in a matter of minutes and does not require any cutting or modification to the internal wiring of your vehicle. It's also a great choice for those who wish to enhance the security of their vehicles as it can be utilized in conjunction with a certified alarm or tracker that will notify your phone or tablet when the vehicle is being tampered with.
Mounting the Unit
The Ghost immobiliser is a great deterrent against car thieves, especially when it is paired with a GPS tracking system. The device makes use of buttons in the centre console, door panels, and steering wheel to generate a unique sequence that only you know to stop your car from getting started. The device is also weatherproof and tamper-proof. It also has a three-year warranty and is recommended by a range of insurance companies.
It is essential to follow the instructions when installing the device. While some people can handle the task themselves, it's best to seek out a professional you are unsure. A multimeter and wire stripper are essential tools to identify the wires and making precise connections. You should also purchase electrical tape and insulation to shield the connections from damage. ghost immobiliser car 's a great idea to test your device after installation is complete to make sure it works as intended.
Ghost immobilisers are a fantastic way to secure your vehicle especially in areas that have high rates of crime. It can be integrated with an iPhone application to facilitate management and monitoring. It blocks key cloning, ECU-swapping, and other security threats. It's a favorite option for car owners looking to protect their investment, and it's simple to install.
The Ghost II immobiliser is designed in a sleek, low-profile design that makes it unnoticeable by thieves. It connects to the CAN (Controller Area Network) system of your vehicle and blocks the engine from being started until a PIN code has been entered. The PIN code is generated using an unique sequence of buttons on the steering wheel and centre console, as well as the doors. It is able to be changed at anytime. The device is also tamper proof and includes a GPS tracker that can help police locate your vehicle in the event of a theft. It's a great choice for protecting your car from theft and is Thatcham approved.